Web Analytics Made Easy - StatCounter

Side Light Fitting Tenders

Get complete information related to latest Side Light Fitting Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Side Light Fitting Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Side Light Fitting Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :45731895 Due date: 07 Jul, 202607 Jul, 2026 NA
Tender For supply of set of side light fitting (led type) for bg ac power car for bangladesh railways, as per drawing: edml277, rev. - nil, packing instruction: light fittings:- each fitting to be wrapped with biodegradable plastic bubble sheet and packed in a card board boxes( single ply corrugated). finally upto 24 lights to be packed in a card board box ( double ply corrugated ) and tied with 3 packing strips horizontally and 3 vertically. detachable diffuser if applicable with light fitting as per drg/spec shall be supplied in separate packing with each diffuser wrapped with biodegradable plastic bubble sheet and packed in a card board boxes( double ply corrugated)and tied with 3 packing stripshorizontally and 3 vertically. quantity of diffusers in a box shall be matching withthe no. of corrosponding light fitting in each box. the material used for product packaging shall be eco-friendly. a list should be pasted on each box showing order no ,pl no, description of the item, drg.no/spec.no, qty,firm's name & address and date of despatch etc. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45514745 Due date: 01 Jul, 202601 Jul, 2026 NA
Tender For corrigendum : cs/rmo/2026/2089-90/steel item - linen trolley with two bucket (50 ltr. each) 8” wheel 4,aproximate weight 10 kg (iron powder coated) oxygen cylinder trolley d type/ 60 cft (iron powder coated) luggage trolley capacity 300-350 kg 4 wheel 8” aproximate weight 20 kg (iron powder coated) double locker narcotic drug cabinet with 2 shelf aproximate weight 20 kg (iron powder coated) 36 x18x15 inch wall mounted iron rack 6 shelf size15x36x72inch slotted angle (iron powder coated) cabinet 6/12 locker size15x36x72inch (iron powder coated) office chair office table computer table revolving chair ware house rack 4 layer(shelves) crc sheet size 200x60x200cm capacity 350kg each layer 3 bucket mopping trolly bmw trolley s.s. with three bucket (30 ltr. each bucket) almirah 5 shelf size15x36x72inch with heavy duty (iron powder coated) hydrolic hand pallet trolley, 3 ton capacity 1150x550 mm fork size spot light with stand for examination procedure ( high intensity led, cri >90 power supply 220-240v ac ,50 hz , low heat genration 01 year warrenty lux meter

CTN :45437069 Due date: 27 Jun, 202627 Jun, 2026 NA
Tender For bid to ras supply of electrical items -good to match with existing surface complete all as specified and directed by eic , supply and fixing in repair modular metal flush box of 4 module with white cover plate including , supply and fixing in repair modular metal flush box of 6 module with white cover plate , material and labour for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick , supply and fixing of led wall light bed side light fitting for study table including 3 watt led, aluminium body, , supply only inner container ss or as per sample suitable for vertical type geyser 50 itrs storage capacity , supply only inner container ss or as per sample suitable for vertical type geyser 25 itrs storage capacity , supply only in repair thermostat 0-75 degree as per exiting size as per oems specifications complete all as specified and directed , supply only in repair heating clement 1.5 kw, as per oems specifications all as specified and directed , supply only in repair heating element 2 kw, as per oems specifications all as specified and directed , supply only indicator lamp with flexibe copper wire of suitable size red by green , supply and fixing pvc connection with steel reinforced pipe for hot water connection of size 18 inches x 1 by 2 inches , supply only apperture plate ss suitable for 25 by 50 itrs geyser along with rubber gasket, nuts, bolts, etc , supply and fixing in repairs plug top 15 by 16 amps suitable for geyser socket outlet complete all as specified and as directed , supply and fixing in repair stop valve but fancy type, chromium plated, screwed down cp of size 15 mm fancy type complete all as specified and directed. , supply and fixing in repair bib taps, cast copper alloy with butterfly handle, screwed down, screwed for iron pipe , supply and fixing of solar collector plate panel as per existing size, specification and make of capacity upto 200 lpd , supply and fixing of solar water heater tank as per existing size, specification and make of capacity upto 300 lpd , supply and fixing of cimfr certified led fiame proof batten suitable for single t8 tube of 20 watt, ip 65 protected , supply and fixing cimfr certified led flame proof bay light, 60 watt, well glass in die cast al housing with heat resistant toughened glass, ip 65 protected. 240 volt, , supply and fixing of flame proof weather proof rotary switch with cable termination box in lm 6 aluminium allcy housing single pole 16 amp, 250 volts , supply and fixing of flame proof-weather proof switch socket and plug combined 16 a, 250 v 2p plus earth , supply and fixing of flame proof weather proof switch socket and plug combined 32 a, 500 v 4p plus earth , supply and fixing of flame proof weather proof metallic hose conduit 3 by 4 inches dia, m20 by 3 by 4 inches conduit mxm by fm x m by fx f 3 by 4 inches dia 300 mm long , supply and fixing of flame proof weather proof metallic hose conduit 3 by 4 inches dia, m20 by 3 by 4 inches conduit mxm by fmxmfxf 3 by 4 inches dia 500 mm long , taking down copper by aluminium point wiring light, fan, socket or power complete, including fixture and fittings , supply and fixing for concealed conduit for one light point wiring with 1.5 sqmm nominal cross-sectional area pvc insulated unsheathed single core copper cable working voltage 1100 volts grade , supply and fixing for concealed conduit for one light point wiring with 1.5 sqmm pvc single core cable for one ceiling fan by exhaust fan point controlled by one, one way switch and regulator , supply and fixing for concealed conduit for one light point wiring 1.5 sqmm pvc single core cable for one 3 point 5 amps switch socket outlet point controlled by one switch on the same board. , supply and fixing for concealed conduit for //bid details 3 / 81 one light point wiring with 1.5 sqmm pvc single core cable for one 3 pin 5 amps switch socket outlet point controlled by one switch on independent board. , supply and fixing for concealed conduit for

CTN :45349134 Due date: 22 Jun, 202622 Jun, 2026 3.62 Crore
Tender For corrigendum : supply of intra aortic balon pump (iabp) (q3) , ultraviolet sterilizer for ot and iccu , central moniternig system , sugical loops 4.5x vision panaromic ttl , advance heart lung machine with temprature controle machine , hand held co- agulometer machine , cell saver , tourniquet esmarch type , non minimal invasive cardiac output monitor with pulmonary artery pressure measurement , washer disinfector , ot light ledtrple dome , surgical loops 2.5x3.5x , cardiac fibrillator , iv fluid warmer , ambu bag adult silicone , spot light led minor procedure , laryngoscope , portable eccho machine , vasccular doppler with wave form , haemodialysis machine hd hdf

Central Government/Public Sector

CTN :45550130 Due date: 17 Jun, 202617 Jun, 2026 NA
Tender For supply of side light fitting complete for 110v dc brake van as per rdso drg. no. skel 4094, alt- a. [ warranty period: 30 months after the date of delivery ] ]

CTN :45349762 Due date: 09 Jun, 202609 Jun, 2026 2.95 Lacs
Tender For procurement of materials for repair of various components used in the fixing of light poles installed across of the failure different wards within municipal area - 61.13 p/l of double wall corrugated hdpe pipe confirming to is 16205 p-24, stiffness class 750 n, externally corrugated and having smooth surface inside with hdpe coupler, elbow, tee at required depth below the ground for laying cable of following nominal outer dia. mfr test report from nabl accrediated is to be submitted. (excavation of earth & back filling with compaction is to be paid extra) all as per pre approved by engineer in-charge.. for additional technical parameters of products/ work, refer annexure "a" attached with this bsr 50mm dia. , providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed unarmoured copper cable confirming to is:1554 p-i / is:7098 p -i of 1.1 kv with electrolytic grade copper made of copper rods confirming to is 613-1964, of purity >99.7%, inner/outer sheath confirming to is:5831 in existing rcc/hume/stoneware / pvc pipe/open duct/cable trench/cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810 for additional technical parameters of product / work refer annexure 'a' attached with this bsr 3 core , supplying and making one end termination with nickel plated heavy duty brass single compression gland (as per is 12943-1990)) sibg type consisting of check nut, gland body, metal washer(3 nos.), outer seal rubber ring, compression nut, heavy duty aluminium lugs (as per is 8309-1993) duly crimped with crimping tool, pvc tape as per is 8337-1976 of following size of pvc insulated & pvc sheathed/ xlpe aluminium conductor cable of 1100 volt grade as required.all as per pre approved by engineer in-charge. for additional technical parameters of products/work, refer annexure "a" attached with this bsr 4 x 10.0 sq.mm pvc tape roll , supply and fixing of following lt supporting accessories with nut bolt & clamps made out as per standard discom's specifications with two coats of red oxide and two coats of aluminium paint etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure "a' attached with this bsr type a lt connector for aerial bunched cable each 73.00

Central Government / Public Sector

CTN :45289218 Due date: 01 Jun, 202601 Jun, 2026 NA
Tender For auction sale of depot ferrous scrap - tl fan guarding - 98050047(15) cond.& u/s ms scrap of tl fan guarding tops and bottoms,fl patties and street light fittings with wire meshes, ms air filters with foam, fl fittings, night light fittings, side light fittings,led fittings, ms air filters for power car with foam, ms fan blades, fan down rods and other train lighting ms fittings and tm air filters, etc., with or without attachments of foam and other attachments.hsn code: 72044900 gst@18% on forward charge basis note: delivery on actual weighment basis only. location:ferrous yard, bin no :- j-1

Central Government/Public Sector

CTN :45259681 Due date: 08 Jun, 202608 Jun, 2026 NA
Tender For supply of instruments/other items (part-6 of 6) - expiratory valve 23bc, cdsco, euce 6993, whogmp, iso134852016, iso90012567, 1 no., 1754, silicone disc mebrane for "l" valve, cdsco, euce 6993, whogmp, iso134852016, iso90012571, 1 no., 1758, raos two stage air regulator 0400kg and 04kg, cdsco, euce 6993, whogmp, iso134852016, iso90012575, 1 no., 1762, video laryngoscope set with polycarbonate blade size 1, 2, 3, 4 (2 nos. each size) all in a carrying case, cdsco, euce 6993, whogmp, iso134852016, iso90012582, 1 no., 1766, polycarbonate curved macintosh blade size 4, cdsco, euce 6993, whogmp, iso134852016, iso90012586, 1 no., 1770, metal reusavke macintosh blade size 3, cdsco, euce 6993, whogmp, iso134852016, iso90012591, 1 no., 1774, metal reusavke miller blade size 0, cdsco, euce 6993, whogmp, iso134852016, iso90012595, 1 no., 1778, ambu auraonce mask size 2, cdsco, euce 6993, whogmp, iso134852016, iso90012601, 1 no., 1782, ambu auraonce mask size 5, cdsco, euce 6993, whogmp, iso134852016, iso90012605, 1 no., 1786, specifications of image processor (should be cdsco, iso 13485 approved) (principal company should have their own service center running with certified trained engineers without any thirdparty arrangements in india.) 1 the image processor should be compatible of providing output of 1920*1090p resolution full hd. 2 the image processor should have compatible of camera head for existing urology procedure rigid scopes. 3 the image processor should have in built led light source in same box. the inbuilt led light source should have life hours of at least 44,000 + hours of life. 4 the image processor should have digital outputs of dvi, sdi, vga and compostie/bnc. 5 the image processor should have compatible separate recordings slots of flexible scope and rigid camera head in full hd resolution. 6 the image processor should have separate settings for flexible scope and rigid which should be clarified at user interface. 7 the compatible camera head to image processor should very handy light weight of 250 gms. 8 the image processor can be used to control the led lights of scope accordingly to use as per surgeon preference and vision comfort., 1 no., 1790, 365 micron reusable 3 meters, flexible fiber (laser machine should be cdso, bis, iso 13458 ce approved), 1 no., 1794, 1000 micron reusable 3 meters, flexible fiber (laser machine should be cdso, bis, iso 13458 ce approved), 1 no., 1798, single pedal spill proof foot switch (laser machine should be cdso, bis, iso 13458 ce approved), 1 no.

CTN :45252391 Due date: 29 May, 202629 May, 2026 NA
Tender For supply of obliqpurple colour for 60-65mm laprosco , set of eight reload cartridges blueobliqgreenobliqpurple for 40-45 mm lapa , set of eight reload cartridges gold for 60mm laparoscopic powered , sodium perborate parasafe powder , spring loaded disposable core biopsy gun 14g 16 cm long standard g , spring loaded disposable core biopsy gun 16g 16 cm long standard co , spring loaded disposable core biopsy gun 18g x 20 cm long stan , sterile nitrile powder free micro textured with long cuff 280mm size 7 , sterile nitrile powder free micro textured with long cuff 280mm size 7.5 , sterile oxygenated regenerated cellulose absorbable hemostat surgicel , sterile synthetic absorbable polygalactin 910 with antibacterial coati , steristrps 1obliq2 inch x 4 inch skin closure , synthetic absorbable green monofilament polyglyconate suture size , disposable clip applicator 5mm with 360 degree rotation , titanium haemostatic clips size large with two applicators and 500 c , triple layered anti microbial foam dressing with silver sulphate , triple layered antimicrobial dressing with silicone sulphate sil , trucut biopsy guns , universal reload for new titanium linear cutter 75 mm selectable s , harmonic ace shears 23 cm for ultrasonically activated cutting an , sterilised braided coated polyglactin 910 violet free tie size 3obliq0 lengt , waterproof opsite dressing with pad 5 x2.5 cm , waterproof opsite dressing with pad 8x6 cm , harmonic acewith shears hand piececurved tip. 5mm shaft diameter 3 , sterilized disposable non-woven fabric wraparound procedure gown , non- absorbable polymer ligating clips large , wound manager medium fistula and post op wound management system , harmonic hd1000i shears 20 - 23 cm with 15 - 18mm blade length and m , 3d anatomically shaped light-weight polypropylene mesh for , 3d anatomically shaped light-weight polypropylene mesh for laparoscopic i , harmonic hd1000i shears 36 cm with 18mm blade length and maryland , 5 mm laparoscopic clip applicator preloaded 20 clips , absorbable poliglecaprone suture 2obliq0 with undyed alloy needle 1obliq2 circle , adhesive five layered anti microbial foam dressing with silver sulphat , adhesive water proof transparent dressing 1.5 x 1.75 inch , chlorhexidine hand disinfectant composition isopropanol alcohol , antibacterial triclosan impregnated polydioxanone loop suturesize , hemolockobliq polymer single clip angled applier laparoscopic reusabl , antimicrobial five layered highly absorbant sacrum shaped dressing w , hemolockobliq polymer single clip applier laparoscopic reusable for extr , aquacel foam ag adh three layer adherant foam dressing com , barrier spray 50 ml , urostomy kit complete with convexobliqmouldable , bioresorbale fully absorbable dual mesh assorted size , black braided silk size 0 alloy needle 1obliq2 circle round body allo , black braided silk size 1 3obliq8 circle cutting alloy needle needle size , dispo laparo atraumatic bowel grasper 5 mm fenestrated straigh , bp blade assorted size10 11 12202223 each equlqty , braided polyglactin no 1 120 cm 1obliq2 circle round body needl , braided polyglactin no 1 90 cm 1obliq2 circle round bod , braided polyglactin no 2obliq0 90 cm 1obliq2 circle reverse cu , braided polyglactin size 1obliq0 90-120cm 1obliq2 circle round b , braided polyglactine no 3obliq0 3obliq8 circle round body needl , braided silk suture for free tie size no 1 each foil contains 2x75 , braided silk suture for free tie size 2obliq0 each foil contains 2x76 , braided silk suture for free tie size 3obliq0 each foil contains 2x75cm , disposable laparoscopic bipolar grasping //bid details 3 / 143 forceps and scissors size , dispo laparoscopic bladeless optical trocar 05 mm x 100 mm comp , disposable laparoscopic preloaded multifire large titanium clip appli , disposable laparoscopic smoke filtration system , disposable laparoscopy camera cover , disposable monopolar cautery tip with ptfe coating length 2 inch , chlorhexidine iv securement dressing 7

Central Government/Public Sector

CTN :45227601 Due date: 21 May, 202621 May, 2026 NA
Tender For supply of side light fitting to rdso sketch skel-4094, with rcf alt 'a'. the exterior colour of fitting shall be as indicated below. a) black - 50% of the ordered quantity. b) red - 50% of the ordered quantity. gasket reference drawing no. icf/sk3-7-6-083 alt. #nil#shall be supplied along with fitting for fitment on coach. note: (i) tenderer shall submit prototype approval letter/first article inspection (fai) clearance letter issued by icf/rcf/mcf/rdso if approved. (ii) prototype approval/ first article inspection (fai)clearance shall be obtained from icf/rcf/mcf/rdso if not approved . [ warranty period: 30 months after the date of delivery ] ]
 Loading, Please wait...

Connect us via What's Up